Skip to main content

Posts

Showing posts from May, 2020

Lightweight, Ultra-Flat Capacitor Ideal for Drones, RPVs and other Critical Equipment

New Yorker Electronics Distributing New ULP Series Capacitor that ‘Single-Handedly’ Replaces Large Arrays of SMT Capacitors   NORTHVALE, New Jersey, USA (BLOGGERS NETWORK) – New Yorker Electronics has announced the distribution of a new Ultra-Low-Profile Aluminum Electrolytic Capacitor from Cornell Dubilier Electronics (CDE) that is designed for bulk capacitance and the lowest board profiles. Now, circuit designers can use a single component, saving space, weight and cost while improving dependability. Energy density of over 0.4 J/cc enables the use of a single component instead of an entire array of SMT capacitors. This improves circuit reliability while achieving high capacitance on the board.   Due to its light weight, the ULP is ideal for use in portable devices and is well-suited for a wide range of applications where height profile, board space, weight and reliability are critical design factors. The ULP is offered in package heights of 2.2 and 3.2mm. ...

Enrol for the EASA Part 147 Instructor Recurrent Online Training Program & Benefit from a special price package

SofemaOnline.com – wholly owned partner company of Sofema Aviation Services – now offers EASA Part 147 Instructor Recurrent Training Program for the special price of 265 USD as part of their growing online training portfolio Saudi Arabia (BLOGGERS NETWORK) Enrol for the Package & Start your Learning Journey Today . About the EASA Part 147 Recurrent Training Package: Ensure EASA Part 147 Instructor Competence with this Recurrent Training Package, also Suitable for General Updating. Part-147, in particular, 147.A.105 (f), states that the experience and qualifications of instructors, knowledge examiners, and practical assessors shall be established in accordance with criteria published or in accordance with a procedure and to a standard agreed by the competent authority. There are no additional requirements or guidance published in EASA rules regarding the experience and qualification of instructors, except that it is recommended that potential instructors be trained in ins...

Cleanroom Technology Market: Rising Demand for Sterilized Pharmaceutical Formulations

The major factors driving the growth of Cleanroom Technology market are the stringent regulatory framework, growth of the biologics sector. Saudi Arabia (BLOGGERS NETWORK) MarketsandMarkets™ published a report titled, “Cleanroom Technologies Market by Product (HVAC, HEPA filters, air shower, apparel, gloves, vacuum systems, disinfectants), Construction (Drywall, Hardwall, Softwall), End User (Pharmaceutical, Biotechnology, Hospitals) - Global Forecast to 2024”. Based on their findings, the cleanroom technologies Market size is expected to be valued at USD 7.9 billion by 2024 from USD 5.7 billion in 2019, growing at a CAGR of 6.6% during 2019-2024. The major factors driving the growth of this market are the stringent regulatory framework, growth of the biologics sector, rising demand for sterilized pharmaceutical formulations, growing demand for medical devices, and technological advancements in cleanroom technology. By product, the consuma...

European Mammography Workstations Market Worth $14 million by 2024

European Mammography Workstations Market by Modality (Multimodal, Standalone), Application (Diagnosis, Advanced Imaging, Clinical Review), End User (Hospital, Breast Care Centers, Academia), Country (Germany, UK, France, Italy, Spain) - Forecast to 2024 Saudi Arabia --(BLOGGERS NETWORK )-- [115 Pages Report] The  European Mammography Workstations Market  is estimated to grow at a CAGR of 5.5% to reach USD 14 million by 2024 from USD 10 million in 2018. This study involved four major activities in estimating the current size of the European mammography workstations market. Exhaustive secondary research was carried out to collect information on the market, its peer markets, and the parent market. The next step was to validate these findings, assumptions, and sizing with industry experts across the value chain through primary research. Both top-down and bottom-up approaches were employed to estimate the complete market size. Primary Research: Extensive primary research was conduc...

Preparative and Process Chromatography Market: Production of Vaccines and Monoclonal Antibodies in Biotechnology and Pharmaceutical Industries

The major driving factors for process and preparative chromatography market include increasing demand for insulin and other biopharmaceutical products Saudi Arabia -- (BLOGGERS NETWORK ) --The major driving factors for process and preparative chromatography market include increasing demand for insulin and other biopharmaceutical products, high demand for omega-3 fatty acids, and rising awareness about advancements in process and preparative chromatography. Emerging economies such as India, China, and Brazil provide opportunity for the players operating in the process and preparative market. However, high cost of instrument and availability alternative techniques for purification and separation of pharmaceutical products are the major restraining factors for this market. The process and preparative chromatography market size is expected to reach USD 8.60 billion by 2023 from the estimated USD 6.27 billion in 2018, at a CAGR of 6.5%. The  preparative and process chromatography m...

Made in Italy, ICSAR Issues a Notification of Counterfeit Products Found in the Kingdom of Saudi Arabia

    Counterfeits of door hinges are found in the KSA Concesio, Italy - (EMAILWIRE.COM) - The following is a notification from ICSA Serrature Srl that the door hinge identified below bears a counterfeit UL Certification Mark.  The door hinge has not been evaluated by UL to the appropriate Standards for Safety and it is unknown if they comply with any safety requirements.   Although the door hinges are marked ICSA SRL , the door hinges were not manufactured or labeled by ICSA Serrature Srl.   Name of Product: Ball Bearing Hinge   Remedy: ICSA Serrature Srl recommends that these products be immediately removed from service and be replaced with UL Certified door hinges.   Identification on the Product: The product is marked with a counterfeit UL Listing Mark and the following: ICSA SRL EN1935:2000 UL LISTED DOOR HINGE   Identification on the Box: BALL BEARING HINGE ICSA   Difference between the door hinge authorized to bear the UL Mark and the...

Japan Outbound Tourism Market is anticipated to be more than US$ 49 Billion by the end of the year 2025

(BLOGGERS NETWORK)  Japan Outbound Tourism Market , Tourists Numbers, Countries (Aus, IND, Hong Kong, South Korea, Taiwan, Singapore, US, UK), Purpose of Visit (Holiday, Visit Friends & Relatives, Business, Others) How is Coronavirus affecting the Outbound Tourism of Japan? The Covid-19 coronavirus outbreak has spread to about 212 countries. This has decimated the aviation and hospitality industries in a big way. Travel restrictions, declining demand, and the spread of Coronavirus in Japan have hurt Japan's outbound tourism market. There will be a big fall in demand for the year 2020, but we also expect the market to bounce back from the year 2021. According to Renub Research, in the long run, Japan Outbound Tourism Market is expected to reach US$ 49 Billion by 2025. Factors driving Japan Outbound Travel Market The various important variables that will boost the Japan Outbound Tourism Market are; rising per capita income, increasing overall economic growth of Japan, rising tour...

Vishay Snap-in Power Aluminum Capacitors Enable Higher Power Density to Save PCB Space, Lower Costs

Miniature Devices Released by New Yorker Electronics Offer Increased Ripple Current to 5.05A and Useful Life of 5,000 Hours at 85°C   (BLOGGERS NETWORK) NORTHVALE, New Jersey, USA – New Yorker Electronics, longtime franchise distributor for Vishay Intertechnology, has introduced a new series of Vishay BC Components miniature snap-in power aluminum electrolytic capacitors. The new Vishay Snap-In Power Aluminum capacitors enable higher power density designs. The new Vishay 257 PRM-SI series offers up to 20-percent higher ripple current than previous-generation solutions in case sizes that are up to 20-percent smaller, while providing longer useful life to 5,000 hours at 85°C.   With ripple currents up to 5.05A, the devices released by New Yorker Electronics allow designers to utilize fewer components to save board space and lower costs. Featuring a cylindrical aluminum case and insulated with a blue sleeve, 257 PRM-SI capacitors feature rated voltages to 500V in 25 compact...

New Exxelia High-Q Ceramic Capacitor Series is Designed for Medical, Scientific and Industrial Uses

New Exxelia High-Q Ceramic Capacitor Series is Designed for Medical, Scientific and Industrial Uses New Yorker Electronics Releases Exxelia Technologies MLCC Series with Low ESR, Ultra High-Q and High Self-Resonant Frequencies   NORTHVALE, New Jersey, USA – New Yorker Electronics has released the newest series of Exxelia CH High-Q RF & Microwave Capacitors. The CH Series offers capacitance options ranging from 0.1pf to 1000pF with voltages from 50V to 1500V. Designed for use in medical (MRI), scientific, industrial and cellular base stations, the series is available in low ESR, ultra High-Q and high self-resonant frequencies.   The CH High-Q ceramic capacitor is a chip capacitor for surface mounting. It is available with non-magnetic copper or nickel barrier and tinning. Ribbon leads are also available for surface mounting. Circuit applications for the series include DC to RF Conversion, matching networks and tuning, coupling and DC blocking.   The CH Series is...

Metal Recycling Market worth $76.1 billion by 2025

Metal Recycling Market research report categorizes the global market by Metal, Scrap Type, End-use Sector (Construction, Automotive, Shipbuilding, Equipment manufacturing, Consumer appliances), Equipment & Geography. ( EMAILWIRE.COM , May 01, 2020 ) The report " Metal Recycling Market  by Metal (ferrous and non-ferrous), Scrap Type (Old Scrap and New Scrap), End-use Sector (Construction, Automotive, Shipbuilding, Equipment manufacturing, Consumer appliances), Equipment, and Regions- Global Forecast to 2025" The global metal recycling market size is projected to grow from USD 52.1 billion in 2020 to USD 76.1 billion by 2025, at a CAGR of 7.8% from 2020 to 2025. The market is projected to grow in accordance with the growth of various end-users of metal recycling across the globe. The increase in consumption of recycled metal into various end-use sectors, including building & construction, shipbuilding, equipment manufacturing, and consumer appliances, is expected to...